DiSEqC / 22KHz Block
 
 
    Features
 
* CE Approved

* Round Model, Easy Installation

* Low Insertion Loss

* Excellent Return Loss

* Low Voltage Drop Down

* Suitable for SMATV systems
 
Introduction

This 22 KHz Block is designed for use in SMATV systems to block the 22KHz tone burst and DiSEqC signals.

This disables the satellite band select function but does not influence the received signal.

It can be easily installed at any point between satellite receiver and dish (antenna).

  Electrical Curve

Insertion Loss  |  Return Loss
SPAN 2500MHz
 
Fig 1
0.3MHz to 50MHz Rejection
SPAN 50MHz
 
Fig 2
  General Specifications
  Item DB - 22K
  Impedance 75 ohm
  Frequency Range 950 - 2300MHz
  Insertion Loss 1.0dB (typ) / 2.2dB (max)
  Return Loss 18dB (typ) / 12dB (min)
  22KHz Block Capability *1 <50mV (typ)
  DC Voltage Drop Down <1.0V (load=250mA)
  Power Passing DC +20V / 500mA (max)
  Dimensions 21(¢) x 58 mm
  Net Weight 53g
   *1 INPUT square wave 22KHz 0.6Vp-p, OUTPUT <50 mVp-p (load=250mA)
   * Specifications are subject to change without notice.

 

 
Home  |  Products  |  Show Room  |  Servic Ccenter
SOONTAI  TECH  CO.,  LTD.
No.43, Huangong Rd., Yung Kang Ind. Yung Kang City, Tainan County 71041, Taiwan
TEL: 886-6-2016969   FAX: 886-6-2013939   E-mail:soontai@soontai.com